Careers

Hong Kong. You are the buyer's primary contact through launch.

Responsibilities

• Own one to three brand programs from quote to MP.
• Run NDA, scope, DFM milestones, and weekly English status.
• Coordinate factory hardware, firmware, NPI, and quality. Escalate early when a gate slips.
• Travel to the plant for pilot builds and major quality events.

Experience we look for

• OEM, ODM, or contract manufacturing with a Western customer.
• Timelines and DFM plans a factory can execute.
• Mandarin helps. It is optional when the China lead is in place.

China factory. Hardware design for wireless consumer and industrial products.

Responsibilities

• Own schematic and PCB layout through production revisions.
• Run DFM and DFA with NPI before pilot.
• Debug first-article and line issues at the bench and on the floor.
• Release documentation RF, firmware, and quality can use.

Experience we look for

• At least one product from layout through SMT, beyond a lab prototype.
• Altium or comparable CAD in a production environment.
• DFM feedback implemented in silicon, not debated away.

China factory. Wireless performance on products we mass produce.

Responsibilities

• Tune antennas and fix conducted and radiated issues.
• Maintain RF fixtures used in production test.
• Prepare FCC and CE submissions with the test house.
• Support NPI when a radio fails audit or line test.

Experience we look for

• Hands-on work with a VNA or spectrum analyzer.
• Shipped a radio product through FCC or CE.
• Close work with layout on keep-outs, matching, and ground.

China factory. Embedded software inside the product.

Responsibilities

• Deliver boot, drivers, OTA, and line test hooks that ship on every unit.
• Bring up new boards with hardware through pilot.
• Give NPI and quality logs and test modes they can run without you in the room.
• Support Physical AI features when they run on this stack.

Experience we look for

• C on a constrained MCU in mass production.
• Line or field debug with a logic analyzer or serial trace.
• A factory test image, not only a demo build.

China factory. New product introduction on the SMT and assembly lines.

Responsibilities

• Plan and run pilots with fixtures and clear operator instructions.
• Track yield and pull in hardware, firmware, and quality when the line stops.
• Freeze process after first article. Revise when data from the floor says you must.
• Report status and risk to Hong Kong in English.

Experience we look for

• Electronics product from SMT pilot into MP.
• Owned ICT, FCT, or a custom fixture.
• Worked yield with operators, not only in meetings.

China factory. Quality systems for export programs.

Responsibilities

• Run incoming inspection and keep ISO 9001 evidence current.
• Build the documentation pack the customer needs before they release POs.
• Lead 8D and FA with suppliers and the line.
• Answer customer quality questions in English with factory data.

Experience we look for

• IQC or SQE in electronics manufacturing.
• Customer-facing 8D or failure analysis.
• ISO 9001 practiced on the floor.

China factory. Intelligence on the device, built for production limits.

Responsibilities

• Integrate cameras, microphones, IMUs, or similar on the product PCB.
• Fit models or pipelines that run within MCU memory and power budgets.
• Define factory tests so bad sensors or models never reach the customer.
• Partner with firmware and NPI through pilot.

Experience we look for

• Edge or sensor stack on hardware that reached MP.
• Production test spec for the AI or sensor function.
• Python plus C or C++ on embedded targets.

China. Software agents tied to factory or device workflows we operate.

Responsibilities

• Build and maintain agents with tool use, evals, and guardrails.
• Debug failed runs with firmware and NPI when integrations break.
• Keep regression sets so changes are tested before the line sees them.
• Scope work to what can ship on a program timeline.

Experience we look for

• Production agent or tool workflow with eval coverage.
• Collaboration with firmware or backend owners.
• Python and comfort reading device or plant logs.